GT POWER GT7005EFi, Operating Instructions Manual

Page: 22 / 28

22. 23. www.gtpower.co.nz
www.gtpower.co.nz
GT7005EFi
engine switch and fuel switch to the “OFF”
position.
WARNING:
Fuel is highly flammable and can be
explosive. Only handle fuel outdoors
and keep sparks, heat and flames
away. Wipe up any spills immediately.
3. Do not change oil while engine is warm.
(Refer to “Changing the Oil” section on
page 16.)
4. Remove the spark plug and pour 20ml of
clean engine oil into the cylinder. Rotate
the engine several times to distribute the
oil, and replace the spark plug.
5. Pull the starter grip slowly until you feel
some resistance. At this point, the piston is
coming up on its compression stroke and
both the intake and exhaust valves are
closed. In this position, it helps to protect
the engine from internal corrosion.
6. Make sure the storage area is a dry and
clean environment.
Calculating Your
Power Needs
1. Using the chart on the following page as a
guide, list all items requiring power simul-
taneously.
2. Then add up all the “running wattage” re-
quirements for all items.
3. Add to that total the highest of the “start-
ing wattages” you listed down. Now you
know approximately how much power you
need to start and run your appliances and
equipment.
Tool or Running Starting
Appliance Watts Watts
1.
2.
3.
4.
5.
Total Running Watts
Highest Starting Watts
= Generator Power
Needs