19.
Engine Oil Maintenance
NOTE:
Always maintain proper engine oil level.
Failure to maintain proper engine oil level could result
in severe damage to the engine and/or shorten the life
of the engine.
Always use the specified engine oil. Failure to use the
specified engine oil can cause accelerated wear and/
or shorten the life of the engine.
Engine oil level should be checked before every use.
See page 14 for more information
CAUTION!
Only use 4-stroke/cycle engine oil.
NEVER USE 2-STROKE/CYCLE OIL.
Synthetic oil is an acceptable substitute for
conventional oil.
Checking Engine Oil
NOTE:
Always maintain proper engine oil level.
Failure to maintain proper engine oil level could result
in severe damage to the engine and/or shorten the life
of the engine.Always use the specified engine oil.
Failure to use the specified engine oil can cause
accelerated wear and/ or shorten the life of the
engine.
Engine oil level should be checked before every use.
1. Always operate or maintain the generator on a flat
surface.
2. Stop engine if running.
3. Let engine sit and cool for several minutes (allow
crankcase pressure to equalize).
4. Remove the engine service panel to access the oil
fill/drain plug.
5. With a damp rag, clean around the oil fill/drain plug.
6. Remove the oil fill/drain plug.
Changing Engine Oil
1. Stop the engine.
2. Let engine sit and cool for several minutes (allow
crankcase pressure to equalize).
3. Remove the engine service panel to gain access to
the oil fill/drain plug.
4. Place oil pan (or suitable container) under the oil
fill/drain plug.
5. Remove oil fill/drain plug. With a damp rag,
thoroughly clean around the oil fill/drain plug.
6. Insert provided funnel around oil fill/drain and
carefully tilt the generator so the oil drains down
through the funnel into the container.
7. Allow oil to completely drain.
8. Fill crankcase with oil following the steps outlined in
Adding Engine Oil on page 14 and tighten oil plug.
9. Dispose of used engine oil properly.
7. Check oil level: When checking the engine oil,
remove the oil fill/ drain plug.
• The oil level is acceptable if oil is visible at the
bottom of the threads of the oil fill plug.
• If oil level is low, add to the correct level using
the supplied oil fill bottle. Do not overfill the oil
crankcase.
Adding Engine Oil
See page 14 for information on adding engine oil.
www.gtpower.co.nz
Summary of Contents for GT4000ESi
Page 1: ......
Page 5: ...5 www gtpower co nz ...
Page 6: ...6 www gtpower co nz ...
Page 30: ...Wiring Diagram 30 3 6 8 1 2 4 5 7 9 10 黑白色 黄色 紫色 www gtpower co nz ...
