background image

GSWeb Playground Equipment 

E-mail) [email protected] 

Website) www.gsweb21.com 

Tel) +82 (0)55 326 9025 

Fax) +82 (0)55 326 9026 

65, Saengnim-daero 259beon-gil, Saengnim-Myeon 

Gimhae-si, Gyeongsangnam-do, Republic of Korea 

ROLLING HILLS 

MODEL NO. 

Rev_2 

2016.05 

GS-RH104 

13 

Maintenance 

C. Routine maintenance

 

To reduce accidents, the owner or operator should ensure that an appropriate routine maintenance schedule is established, implemented and 

maintained. This should take into account local conditions and the manufacturer's instructions that can affect the necessary inspection 

frequency. The schedule should list the components to be maintained and should also give procedures for dealing with complaints and 

breakdowns. 

The routine maintenance of playground equipment and surfaces should consist of preventative measures to maintain their level of safety, 

performance and compliance with the relevant part(s) of EN 1176. Such measures should include: 

 

a) tightening of fastenings; 

b) re-painting and re-treatment of surfaces; 

c) maintenance of any impact attenuating surfaces; 

d) lubrication of bearings; 

e) marking of equipment to signify loose fill finished surface level; 

f) cleaning; 

g) removal of broken glass and other debris or contaminants; 

h) restoring loose fills to the correct level; and 

i) maintenance of free space areas. 

 

D. Corrective maintenance 

Corrective maintenance should include measures to correct defects, or th re-establish the necessary levels of safety of the playground 

equipment and surfaces. Such measures should include: 

 

a) replacement of fastenings; 

b) welding of welding repairs; 

c) replacement of worn or defective parts; and 

d) replacement of defective structural components. 

 

E. Personal safety 

Repairs during operation that could put the safety of maintenance personnel of the public at risk, should be avoided. 

 

F. Equipment alterations 

Alterations to parts of a piece of equipment or structure that could affect the essential safety of the equipment should only be carried out 

after consultation with the manufacturer or a compete person. 

 

Summary of Contents for ROLLING HILLS GS-RH104














Reviews: