- 24 -
STP 500
110
Indication of the Multicast
IP Addresses
Multicast IP addresses are assigned to the streams. IGMP-capable switch-
es recognize the addresses automatically and, if configured accordingly,
route the streams only on request to end devices. This greatly reduces
network traffic.
—> IP addresses in the range 224.0.0.0-239.255.255.255 are mul-
ticast addresses, but many addresses in this range are reserved
(www.iana.org/assignments/multicast-addresses).
—>
Use the 239.x.y.z range!
It is suitable for streaming TV content and
must also be used for Panasonic Viera TVs.
For x use only the range of 1…127.
The range 0 ... 255 is available for y and z.
—> You will find descriptions to important terms for configuring a
streaming network in menu
Help > Multicast Setup
.
111
Setting the Multicast IP Port
112
Select the protocol UDP or RTP for this stream.
113
Enter the desired service name here.
114
Enter the desired SID, TS-ID and ON-ID as hexadecimal value.
119
With this button you apply all changes to the
task overview
.
-> Please note the following
120
.
120
Before leaving a menu
, changes must be transmitted to the device.
• Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
