background image

 

 

- 33 - 

STP 500

 

r

eboot

 

the

 

system

 

•  Select menu item 

System > Reboot System

.

 

  Confirm the security prompt —> The device restarts.

—>  The access to this menu depends on the user rights in the user man-

agement (page 26).

 

s

hut

 

down

 

the

 

system

 

•  Select menu item 

System > Shutdown System

.

 

  Confirm the security prompt —> The system will shut down. 

—>  A  restart  is  then  only  possible  by  pressing  the  Power  key  on  the 

device.

—>  The access to this menu depends on the user rights in the user man-

agement (page 26).

 

usb f

unCtions

 

Via the USB functions you can…

 

– 

copying media data to the device,

 

– 

reset the network settings,

 

– 

reset administrator password and

 

– 

perform a firmware update.

—>  The file systems FAT32, NTFS and exFAT are supported.
—>  The footer of the user interface contains status information on the 

USB functions.

 

- C

oPying

 

media

 

data

 

to

 

the

 

deviCe

:

 

•  Copy the media data into the root directory of an "empty" USB stick.

 

•  Insert the USB stick into a USB interface.

 

•  The media data is automatically copied to the device.

—>  The following file types are supported: 
 

png, jpg, ts, mkv, avi, divx, mp4, mov, mpeg

Summary of Contents for STP 500






































Reviews: