- 33 -
STIM 1916 CT
Since there are different international requirements and the function
is ultimately dependent upon the devices used, we can propose
only common values here: United Kingdom 0x0000233A, Nordig
0x00000029, France and the European Association of Consumer
Electronics Manufacturers 0x00000028.
264
Bits for LCN data structure
—> For "LCN Data Structure" IEC 62216-1 recommends the value
"10 Bit". Receivers in German speaking regions mainly use this set-
ting. As in some regions (e.g. United Kingdom, Nordig, France etc.)
different regulations exist, observe the country specific guidelines, if
required.
265
Herein you can add services manually.
—> Only TS-/ON-IDs are available which are regis-
tered in the NIT.
—> For entering/indication of the different IDs the
number format can be set to
hexadecimal
or
decimal
in menu
System > Firmware
.
266
Via this button you can delete all SD-LCNs.
267
Via this button you can delete all HD-LCNs.
268
Via this button you can export LCNs as a ".bin" file
—> The exported file contains the LCNs as well as the NIT.
269
Herein you can import/add a ".bin" file.
—> You can also add an "*.gsl" file, which you had generated with a
PSW 1000 (from version 61 on) or a PSW 160 (from version 17
on).
270
Before leaving the menu, changes must be transferred to the head-end
station!
• Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.