- 35 -
STI 1916 CT
e-m
ail
If you would like to receive error messages (e.g. at a defective PSU or fan, or a
missing input signal etc.) via e-mail, herein enter the access data of the outgo-
ing mail server of your e-mail account. Then the e-mail is sent via the outgoing
mail server of your e-mail account to the incoming mail server of this account.
—> Therefor the configuration interface must have access to the Internet.
140
141
142
143
144
145
146
140
Herein enter the e-mail address to transmit and receive the e-mail.
141
Herein enter the password for the outgoing mail server of your e-mail account.
142
Herein enter the outgoing mail server of your e-mail account.
143
Herein enter the port of the outgoing mail server of your e-mail account.
144
Herein select the e-mail encryption which is supported from your e-mail
provider:
– "TLS/STARTTLS" (usually Port 587) or
– "SSL" (usually Port 465)
145
Via button
send alarm mail
you can send a test mail.
—> Before you can send a test mail, changes must be transferred to the
head-end station! Therefore click on button
.
