- 27 -
STI 1916 CT
f
ilter
90
91
92
93
94
95
99
100
96
97 98
In menu
Filter
you can re-
move stations (Services) and
PIDs (Drop PIDs) from the data
streams of the transponders
(with adaptation of the tables).
—> For entering/indication of the different IDs the number format can
be set to
hexadecimal
or
decimal
in menu
System > Firmware
.
90
Select displaying the station filter.
91
Herein you can select whether only one line is displayed or all lines are
displayed.
92
Indication of current (
used
) and maximum (
max
) output data rate of the
transponder.
93
In column
Filter
you can individually switch on or off the filter.
94
Indication of
TS-/ON-ID
.
95
In column
Pass Service
you select the stations (services) which you would
like to play out.
—>
Only if the filter
93
is enabled, services in which the hook has been
removed (
)
, are suppressed (filtered out)!
—> If the filter is enabled, new services added to the transponder are
suppressed until a hook is set.
—> The background colour
in column
Line
indicates an output data
overflow. In this case check the values in column
used/max
92
,
change the output settings or remove stations from the data stream
using the station filter.
