- 17 -
STI 1916 CT
37
Via button
Logout
you can leave the graphical user interface.
38
Via the
Help
menu you can call up the assembly instructions (PDF) as well
as a ZIP file containing a list and all licences of the used OpenSource
software.
39
Overview of the transponder set, with output frequency, TS-/ON ID, Multi-
cast address and data rate. Via the background colour of column
Line
you
are informed about the quality of the input signals ( good/ no signal),
a possible exceeding the output data rate ( ), or whether the output is
switched off ( ).
—> If in menu Configuration/Input (page 18) transponder names are
NOT assigned, the name of the first station of each transponder is
displayed.
40
Hardware monitoring; shows the state of the power supplies and the fans
41
Via button
Download
a configuration protocol can be stored as text file
resp. opened using a text editor.
—> From this protocol file e.g. a list of the programmed stations can be
prepared using e.g. a text editor.
42
Herein notes are displayed, which you can enter in menu System/User.
P
erfor m
Changes
Before leaving a menu
, changes must be transmitted to the head-end station.
• Therefore click on button
.
After that
is displayed for a short time in the upper right corner.
n
umber
for m at
For entering/indication of the different IDs the number format can be set to
hexadecimal or decimal in menu
System > Firmware
.
