- 17 -
HMPT 1000 C
4.2 C
ontrol
Panel
The key pad on the head-end station is used to scroll through the menus:
scrolls forward through the menus.
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
scrolls backward through the menus.
saves all entries.
5
P
rogramming
5.1 P
rePar ation
• Test the software versions of the head-end station and the cassette and up-
date them if necessary. The current software versions can be found on the
website "
www.mygss.eu
".
• Connect the test receiver to the RF output or the test output of the head-end
station.
• Set the output channel / output frequency of the cassette (page 28) and adjust
the TV test receiver to this channel / this frequency.
• Switch on the channel strip "
A
" (modulator) if necessary (page 28). For the
channel strip, there is a status LED which glows if the channel strip is switched
on.
Status LED
Channel strip
"A"
Status LED
Channel strip
"B"
• Balance the output levels of the channel strips "
A
" and "
B
" if the difference
in level is
≥
