- 9 -
HMPT 1000 C
g
ener al
The cassette is equipped with two channel strips ("
A
" and "
B
"). The "
A
" chan-
nel strip has a digital SAT tuner and can process both the transport stream fed
in via the LAN interface and the transport stream from the SAT tuner. Using an
appropriate CA module, encoded services coming from the SAT tuner can be
decoded in channel strip "
A
". The "
B
" channel strip only
processes
the trans-
port stream fed in via the LAN interface. The transport streams are directed to
the ASI output or the output converter depending on the set output signal route
"
OUTROUTE
" via the digital signal processing levels. The RF output signals are
sent through the RF output on the cassette to the output collector. The common
output level of the channel strips can be set in the output collector on the head-
end station.
An LED in channel strip "
A
" provides an indication of the signal quality for
the SAT IF input signal and shows whether the modulator of the channel strip
is activated (LED lights up) or deactivated. The quality of the transport stream
being received is also shown in the display ("
CN…
").
The integrated TPS module (Transport Stream Processing) processes the data
from the transport streams.
The channel strips are indicated in the head-end station display with "
Bx …A
"
and "
Bx …B
". The control of the cassette takes place via the control unit of the
head-end station.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "
V 45
"
or higher. You can find the current operating software for the control unit and
the cassette, the software "
BE-Flash
" and the current assembly instructions on
the website "
www.mygss.eu
".
The cassette is intended for use in the STANDARD LINE head-end stations.
