GSS HDMT 1000 MPTS, Assembly Instructions Manual

Page: 40 / 46

- 40 - - 40 -
Saving settings
• Press the
M
button.
—> The settings are saved.
—> You are returned to the “Selecting the cassette” menu
item via connection
A
(page 20).
—> If functions of the TPS module are activated, their sta-
tus is shown in the second line of the display:
“
M
” – Station filter is switched on.
“ C ” – Network/operator identification CAT is
activated.
—> By pressing the button, you will be returned
to the menu item “Selecting the channel strip” “ LINE ”
via connection
B
without saving the programmed
data (page 27).
—> If necessary set channel strip “ B ”.
5.2.1 Operation with a CA module
In order for this function of the CA module to be possible, in
the “Setting the station filter” – “
PROGRAM ” menu (page 33)
services must be selected which can be decoded by the CA
module you are using and your smart card.
Where both encrypted and unencrypted services are trans-
mitted, short-term picture loss may occur when switching be-
tween encrypted and unencrypted services.
Setting the operating voltage for the CA module
In this menu the operating voltage for the CA module can
be set.
• Use the buttons to set the operating voltage for the
CA module (” 3.3 V “ / ” 5.0 V “).
Bx 4A
Supply
CA
5.0 V
3.3 V / 5.0 V
C