GSS HDMT 1000 MPTS, Assembly Instructions Manual

Page: 30 / 46

- 30 - - 30 -
Setting the output IP address
In this menu you set the output IP address for the channel strip
selected. This IP address the services wished are allocated in
the station filter.
Allocate different IP addresses to the channel strips.
• Press the
▶ ◀
/
buttons to position the cursor under the
digit of the IP address to be set.
• Using the buttons set the IP address wished.
• Press the button.
—> The “Setting the input channel” – “
INPUT
” menu is
activated.
Setting the input channel
Once the HF receiving stage has synchronised to the input
signal, “
OK ” is displayed.
If “ – – ” appears in the second line of the display, there is no
input signal present. Check the configuration of the antenna
system and the head-end station as well as the preceding
settings of the cassette.
• Use the buttons to set the desired input channel
(” C5 ” …” C12 ”, ” C21 ” … ” C69 ”).
—> Beside the input channel set the relevant input fre-
quency is displayed.
Bx 4A
227. 40. 50. 60
OUT-IP
Å Ï
/
Bx 4A
C30 (546.0)
INPUT
OK
Å Ï
/
Frequenzanzeige / Feinabstimmung
Frequency display / Fine tuning
C5…C12, C21…C69
-64…+64