GSS HDMT 1000 MPTS, Assembly Instructions Manual

Page: 28 / 46

- 28 - - 28 -
Selecting the transmission protocol
• Press the
▶
button to position the cursor under ” UDP ” or
” RTP ”.
• Using the buttons to select the transmission protocol
wished:
“
UDP
” – The User Datagram Protocol is for the connec-
tionless transmission of data to a certain applica-
tion. The port number of the service is also sent
which the data should obtain.
“ RTP ” – The Real-time Transport Protocol is for continu-
ously transmitting multimedia data streams in an
IP network. Unlike UDP, the header is transmitted
which makes the data transmission more robust.
Setting the port number
• Press the
▶
button to position the cursor under the port
number e.g. ” 1234 ”.
• Use the
▶ ◀
/
buttons to position the cursor under the
digit of the port number displayed to be set.
• Using the buttons set the port number wished
(”
0
” … ”
65535
”).
• Press the button.
—> The “Defining the quantity of data packets, setting
the forward error correction, setting the transmission
channel” – “
PKTS / FEC ” menu is activated.