manualshive.com logo in svg

GSS HDE 400, Assembly Instruction Manual, Page: 6 / 50

Share
Download
GSS HDE 400 Assembly Instruction Manual Download Page 6

 

 

- 6 - 

HDE 400

 

MPEG4 Encoder

Transport stream ....................................H.264/AVC High Profile Level 4.0
Setting range of total data rate (video + audio + tables) ........... 1 Mbit/s…30 Mbit/s
Video data rate:
1920x1080p .......................................................... 6 Mbit/s…30 Mbit/s
1920x1080i ........................................................... 6 Mbit/s…24 Mbit/s
1280x720p ............................................................ 4 Mbit/s…24 Mbit/s
720x576i ............................................................... 1 Mbit/s…10 Mbit/s
720x480i ............................................................... 2 Mbit/s…10 Mbit/s
Audio data rate ......................................................... 32 kb/s…384 kb/s

 

RF Output COFDM

Frequency range .............................................. 42.0 MHz … 860.0 MHz
Channels ...........................................................C5 … C12, C21 … C69
Transmission mode .............................................................................. 2k
Kinds of modulation ......................................... QPSK, 16 QAM, 64 QAM
Code rates ....................................................... 1/2, 2/3, 3/4, 5/6, 7/8
Guard intervals .................................................... 1/4, 1/8, 1/16, 1/32
Return loss ...................................................................................> 8 dB
Output level .............................................................................. 96 dBμV
Output impedance ..........................................................................75 Ω

 

RF Output QAM

Frequency range .............................................. 42.0 MHz … 860.0 MHz
Channels ............................................................................. S21 … C69
Kinds of modulation ...................................QAM 4, 16, 32, 64, 128, 256
Output level .............................................................................. 96 dBμV
Output impedance ..........................................................................75 Ω

 

ASI Interfaces

Norm ...........................................................................DIN EN 50083-9
Format ...............................................................MPEG ISO IEC 13818-1
Max. data rate ...................................................................... 108 Mbit/s
Impedance ..................................................................................... 75 

Ω

Level (input / output) ......................................................800 mV

pp

 ± 10%

Return loss (input)................................................> 17 dB (5 … 270 MHz)

 

LAN Interface

Standard ................................................................10/100/1000 MB/s
Transport stream ....1 x SPTS/MPTS (Single/Multi Programme Transport Stream)
Protocols ........................................................... UDP (User Data Protocol), 
 

RTP (Real-Time Transport Protocol)

Summary of Contents for HDE 400



















































Reviews:

No comments