GSS HDE 400, Assembly Instruction Manual, Page: 19 / 50

- 19 - HDE 400
e
nCoder
Via this menu you get access to the submenus in order to do the encoder set-
tings and to select the desired input.
—> If no encoder settings should be done, press button .
The "RF output" – " RF " main menu is activated (page 23).
• Press button .
—> The "
SERVICE-ID
" submenu is activated.
s
erviCe
id (sid)
In this menu you can assign a Service ID for the signal which is to be encoded.
Bx 2
00001 SERVICE-ID
• Use the buttons to select the digit of the SID to be set and use
buttons to set the desired SID.
—> Take care, not to assign the same SID twice.
• Press the button.
—> The "Channel name" – "
NAME
" submenu is activated.
P
rogr a mme na me
In this menu, a programme name for the signal which is to be encoded, can
be set.
Bx 2
HD NAME
• Use the buttons to select the digit of the channel name to be set and
use buttons to set the desired character .
—> Press button to delete the complete name.