GSS HDE 400, Assembly Instruction Manual, Page: 23 / 50

- 23 - HDE 400
a
udio data r ate
In this menu you set the data rate with which the audio signal shall be en-
coded.
Bx 2
192 kbps AUDIO
Stereo
• Use the buttons to enter the desired audio data rate.
—> Some data rates are selectable for mono as well as stereo signals.
• Press the button.
—> Return to the main menu "Encoder settings".
• Press the button.
—> The "RF output" –" RF " main menu is activated.
rf
outPut
Herein you can select the kind of modulation (COFDM or QAM) of the RF
output signal or, if not needed, you can switch off the RF output. You also get
access to the submenus of the RF output signal settings.
—> If no RF output settings should be done, press button .
The "Ethernet parameter" – " ETHERNET " main menu is activated
(page 33).
Bx 2
QAM RF
C69 =>
d
eaCtivate the
rf
outPut
• Use the buttons to select "OFF".
Bx 2
OFF RF