- 6 -
The status LED is lit on the panel to indicate at the configuration mode, the status light is off upon exit.
4.1 Commands for Configuration
Set up voice alarm
phone number
To set the 1st group to the 9th group of voice alarm phone number
【
1-9
】
indicates that the first group to the Ninth group alarm
number correspondingly.
Example: If the user wants to set 13812345678 for the first set of voice
alarm phone number
Method one:
After you press the # key to enter the configuration mode, press the
3113812345678# , press * Then press # To exit Setup.
Method two:
Remote calling into the alarm panel put in password (initial password: 1234 )
when being asked, then press the # key, hear the voice prompt means the
host into setting state.
In remote setting, press a digital then the host will broadcast one digital
speech, if press a digital not broadcast speech or press once broadcast second
speech mean setting not correct. Press* key to exit.
Method three:
Send SMS messages 12343113812345678# to a alarm panel (which at the
beginning of 1234 is the user password), the alarm panel will reply with
SMS message "Group 1 phone number :13812345678” to confirm the 1st
group alarm phone number is set to13812345678 successfully.
For users using the telephone line extension, you should dial a number (such
as "9") to pick up a dialing tone, then with your command you should add to
this number a " * ". So the completed command becomes 9*13812345678#
Remark:
7,8,9 group number for HELP SENIOR zone and panel will only dial these
three groups number when that specific zone alarming.
Syntax:
【
3
】
+
【
1-9
】
+
【
Phone number
】
+
【
#
】
Delete voice alarm
phone number
Used to delete the first groups to the Ninth group alert phone numbers
Example: If you want to delete the first set of alarm phone number,
Method one:
After you press the # key to enter the configuration mode, press the 31# ,
then press * then press # to exit Setup.
Method two:
After entering the phone remote setting status, press 31#.
Method three:
Send SMS message 123431# On the alarm panel, alarm panel reply " Group
1 phone number: ” to confirm the 1st group alarm phone number has been
removed.
Syntax:
【
3
】
+
【
1-9
】
+
【
#
】
Summary of Contents for Burglar
Page 1: ...GSM Burglar Alarm System ...
