- 9 -
5702120013001234567#, * then press # to exit Setup.
Method two:
After calling and connected to the panel from remote, press
57012200070012345,then press5702120013001234567#
Method three:
Send
SMS
message
123457012200070012345#
and
12345702120013001234567#
【
Number week
】
+
【
#
】
SMS Send ON/OFF
When
Accessory’s
Battery Low
[0/1]: 0 means OFF,1 means On\N. Default is OFF
E.g. : Set SMS notification ON when battery of detectors is in low
voltage.
1. Press [#] on the keypad and then press [591#]
2. Remote calling the SIM card number, input [pa[#] to enter
setting status, then press [591#].
3. Send SMS message [1234591#] “”
Command
：
[59]+[0/1]+[#]
Set the type of
defense zone
To set 99 zone type, 00-99 represents 0-99 zone number, 1-8 represents
one of the 8 zone type:
1. NORMAL
2. STAY ARM
3. INTELLIGENT
4. EMERGENCY
5. CLOSED
6. CHIME
7. WELCOME
8. HELP SENIOR
The last 0/1 represents 0 siren of panel produce no sound upon alarming
while 1 is sounded.
Example: Set zone number 2 as STAY zone type, and siren not sound upon
alarming2.
Method one:
Press # enter the configuration mode, press 600220#, press * then press # To
exit Setup.
Method two:
After calling and connected to the panel from remote, press 600220#
Method three:
Send SMS message 1234600220#
Syntax:
【
60
】
+
【
00-99
zone number
】
+
【
1-8 Type
】
+
【
0/1
】
+
【
#
】
Set mode of wired
alarm zone
Set wired alarm zone to NO or NC. The zone number of 51-54 are
wired defense zones, system default is 51-54 are wired zones with NO
mode.
Summary of Contents for Burglar
Page 1: ...GSM Burglar Alarm System ...
