GSi PNEG-1429, Assembly And Operation Manual

Page: 14 / 46

4. Assembly and Installation
14 PNEG-1429 Horizontal Drive Units
Mounting Bearing to Bearing Plate
1. Align bolt holes on bearing flange with bolt holes on bearing plate.
2. Secure bearing to bearing plate using appropriate bolts, lock washers, and nuts. (See Chart below
and Figure 4C.)
Figure 4C
Bearing Bolts
6" 7/16"-14 x 1-1/2" Hex Bolts
8" and 10" 1/2"-13 x 1-1/2" Hex Bolts
12" 5/8"-11 x 2" Hex Bolt