2. Safety
PNEG-2116
Bucket Elevator
9
Fall Hazard
•
Keep access door closed while on a platform to avoid falls.
•
Always use proper personal protective equipment and proper
clothing when using equipment. Failure to follow safety precautions
can result in severe injury or death.
ST-0042-2
Toxic Fume and Dust Hazard
•
Do all work outside or in a well-ventilated area.
Dispose of paint and solvent properly.
•
Remove paint before welding or heating:
— Avoid potentially toxic fumes and dust. Hazardous fumes
can be generated when paint is heated by welding,
soldering, or using a torch.
— If you sand or grind paint, avoid breathing the dust. Wear
an approved respirator.
— If you use solvent or paint-stripper, remove stripper with
soap and water before welding.
— Remove solvent or stripper containers and other flammable
material from area. Allow fumes to disperse at least
15 minutes before welding or heating.
ST-0043-2
> 500 lbs
(2.25 kN)
Platform Load Limit
•
The platform load limit is 500 LBS (2.25 kN).
Do not exceed this weight.
•
Excessive load will damage the platform and
cause platform to fall. Severe injury or death
will result.
ST-0044-2
