4. Assembly Instructions
PNEG-1773-EU
42'-135' “X” Series Ladder, Cage and Platform - European Standard
25
Platform and Safety Cage Package
10. Attach the ladder flare to the ladder using 5/16" hardware. You must drill the bottom hole through the
ladder and use 5/16" hardware.
11. Attach the cage hoops and cage splice brackets to the ladder flares and platform posts. This must
all be assembled at the same time using 5/16" hardware.
NOTE:
Be sure the ladder flares are vertical and parallel to the platform posts by adjusting the
splice brackets. The ladder will NOT be square to the platform due to the radius of the
bin. The side closest to the bin wall will be closer to the platform.
Figure 4L
Ref #
Part #
Description
A
LDR-5218
Ladder Safety Gate
B
LDR-5167
Safety Cage Hoop Splice (2)
C
LDR-5164
Safety Cage Hoop - Standard (4)
D
LDR-5493
Formed Ladder Flare (2)
E
Attach safety cage hoop to formed ladder flare using 5/16"-18 x 1" flange bolt (S-10260)
and 5/16"-18 flange nut (S-10268).
F
Attach safety cage hoop splice to safety cage hoop using 5/16"-18 x 1" flange bolt
(S-10260) and 5/16"-18 flange nut (S-10268).
G
This hole must be drilled through ladder on right and left sides.
