GSi 42-60 X Series, Assembly Instructions Manual

Page: 14 / 96

14 PNEG-1773-EU
42'-135' “X” Series Ladder, Cage and Platform - European Standard
4. Assembly Instructions
72'-135' Ladder Eave Platform Assembly
Ladder Eave Platform Package
1.
Figure 4A
shows the assembly of the platform supports. Use 5/16" hardware at all the connection
points. (Platform floor will have to be attached at the same time as support angles.)
NOTE: When installing the top wind ring, do NOT use the top set of holes in the stiffener.
2.
Figure 4A
shows the assembly of the platform floor system. This must all be assembled at the same
time using 5/16" hardware.
NOTE: Leave all hardware loose until completely assembled.
3.
Left platform bracket must line up with stiffener, roof rib and rafter or beam if present in roof.
Figure 4A
Ref # Part # Description
A STX-0014 Platform Toe Plate
B STX-0011 Platform Short Angle (3)
C STX-0081 “X” Series Platform Long Angle (2)
D STX-0082 “X” Series Platform Bracket - Right
E STX-0009 “X” Series Platform Bracket - Left
F STX-0080 Single Piece Platform Floor
G
Place brackets in top sidewall ring
H
Attach at stiffener to sidewall connection. See note above about wind rings.
I
Use 5/16"-18 x 3/4" truss bolt (S-10267) and 5/16"-18 flange nut (S-10268) to attach platform
floor and all substructure.