GSi 42-60 X Series Assembly Instructions Manual Download

Page: 7 / 96

2. Safety

PNEG-1773-EU

42'-135' “X” Series Ladder, Cage and Platform - European Standard

Safety Cautions

Use Personal Protective Equipment

Eye
Protection

Hearing
Protection

Hand
Protection

Head
Protection

Respiratory
Protection

Foot
Protection

Fall
Protection

• Use appropriate personal protective equipment:

• Wear clothing appropriate to the job.

• Remove all jewelry.

• Tie long hair up and back.

ST-0004-1

Follow Safety Instructions

• Carefully read all safety messages in this manual and

safety signs on your machine. Keep signs in good

condition. Replace missing or damaged safety signs.

Be sure new equipment components and repair parts

include the current safety signs. Replacement safety

signs are available from the manufacturer.

• Learn how to operate the machine and how to use

controls properly. Do not let anyone operate without

instruction.

• If you do not understand any part of this manual or

need assistance, contact your dealer.

ST-0002-1

Maintain Equipment and Work Area

• Understand service procedures before doing work. Keep area

clean and dry.

• Never service equipment while it is operating. Keep hands, feet,

and clothing away from moving parts.

• Keep your equipment in proper working condition. Replace worn

or broken parts immediately.

ST-0003-1

Summary of Contents for 42-60 X Series

































































































Search results

Summary of Contents for 42-60 X Series

Reviews:

Related manuals for 42-60 X Series

Brands by name

Popular brands

GSi 42-60 X Series, Assembly Instructions Manual

Search results

Summary of Contents for 42-60 X Series

Reviews:

Related manuals for 42-60 X Series

Brands by name

Popular brands