Gsertel 901622, User Manual

Page: 22 / 78

Hexylon High-performance portable meter
22
1.4.- Update
When the Hexylon is connected to the internet
(via Ethernet or Wi-Fi) it is automatically detected
if a new firmware version is available. If so, tap
on the Update button and your Hexylon will be
automatically updated.
Be aware that the meter must be connected to the
external powering to be updated.
This menu allows to configure the synchronization
between the Hexylon and the cloud (see section
Hexylon Cloud)
You can also update your device using an USB stick.
To do that, save the update file in an USB stick
and insert the USB stick into the USB connector of
your HEXYLON. A message appears automatically
indicating that an update is available on the USB.
When you go to the Update menu, the following
screen will appear:
1.5.- Licenses
Shows a list with all the licenses available on your
HEXYLON.
1.6.- About
Shows all the information about your equipment,
both hardware and software.
It is also possible to open the user manual and read
it in the HEXYLON screen.
Tap on Update button to
start updating
Tap on the restore
button to restore the
factory settings
Tap on the update
button to begin
the process
Shows the
change log
Allows to
synchronize the
device with the
cloud
Applies to the Hexylon the
changes synchronized from
the cloud