Gruppo Imar IVY 24 MR/MN, Installation & Use Manual, Page: 7 / 44

5
“STAND-BY” MAIN MENU
When the boiler is turned on, two operating
modes are possible. These constitute the
MAIN MENU from which it is possible to set
any operating mode required or view the
boiler status at any time. The characteristics
of the possible options for each page of the
MAIN MENU are here listed:
Page 1 – STAND-BY (Pic. 5.1)
In this mode the device is powered but all
functions regarding the supply of domestic
hot water or central heating are inactive. In
this mode the central heating system pressure
is displayed (in boilers with transducer) and
it is possible to turn the boiler on by pressing
BUTTON 1, at the MAIN MENU page :
In order to go back to the first page (stand-
by), press again BUTTON 1. (Pic. 5.2)
By pressing BUTTON 4, the INFORMATION
MENU can be accessed; by pressing BUTTON
4 again, the first page is displayed (Pict. 5.3).
Read the relevant chapters for more
information about the functions in each
menu: “FUNCTION, PARAMETERS MENU”
While in the stand-by mode, all fault
indication modes remain active as do the
main maintenance functions for the diverter
valve (when fitted) and the circulator unit
together with the ANTI-FROST function.
Pic. 5.1
Pic. 5.2
Pic. 5.3
W A R N I N G : I n s t a n d b y / o f f
mode the boiler is inactive
but its electricity supply is still
connected!