10182 E 06 - 2005
Technical information:
MODULAR VALIDATOR XV
23
TECHNICAL NOTES OF INTEREST
Inputs are TTL:
Logical level zero: 0 – 0.7 Vdc
Logical level high: 5 Vdc
Input disconnected: is configurable using hardware and each validator code
will have its own. The configuration consists of fitting a resistor on the inputs
“+” or “GND (pull-up or pull-down)
The output module on the validator, requires the following:
-
It does not control a sorter
-
It controls a sorter through an interface board
-
The exit solenoid are controlled directly by the output module