GRUNDIUM OCUS MGU-00001, User Manual

Page: 10 / 40

Ocus® User Guide version 9.0
9
Hermiankatu 6-8G, 33720 Tampere, Finland
©2021 Grundium. All rights reserved.
6.2 POWER BUTTON LIGHTS
Light Explanation
Green breathing Scanner is switched off. Power cable is connected.
Green steady Scanner is connected to the Internet.
Green blinking Scanner is in live view mode, scanning or exporting.
Yellow steady Scanner is connected to the Internet, but remote use is disabled.
Red steady Scanner is in error state (see Troubleshooting).
Red blinking Scanner is powering up or shutting down.
Blue steady Scanner ’s WLAN/Wi-Fi access point is on.
Purple steady Scanner’s first start-up is ongoing.
Purple blinking Scanner ’s software update is in progress.
7 FIRST USE
When you use the scanner for the first time, you need to connect it to your computer or tablet and set up an
Internet connection for the scanner . You can use either a network cable or a WLAN/Wi-Fi for the connection.
During the setup process, assign the scanner to either an existing team or create a new team. A team can have any
number of members, but each user must have a valid Grundium account to use the scanner. To join an existing
team, ask a team member to add you.
Note:
When starting up the scanner for the first time, you must have an Internet connection. After that, it is possible
to use the scanner even without an Internet connection, but the feature set will be limited (See Table 1 ).
Important notice: To keep the security certificates up to date, the scanner must be connected to Internet at least
once in every 2 months
– this is mandatory for secure connection between the scanner and the browser.