background image

 

 

 

 

 

 

 

Ocus® User Guide version 9.0

 

36 

Hermiankatu 6-8G, 33720 Tampere, Finland 

©2021 Grundium. All rights reserved.

 

 

23

 

PRODUCT AND SAFETY INFORMATION  

 

Keep the scanner dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals which 
may damage the scanner. 

 

Use only dry and clean slides. Drying liquid substances can jam the slide holder mechanism. Spill of liquid on 
slide support glass may cause the liquid to leak to internal parts and lead to malfunction. 

 

Do not use or store the scanner in dusty or dirty areas. Use the protective cover when the scanner is not in 
use. 

 

The scanner can be stored in temperatures b1 and +70 degrees of Celsius (34 to 158 Fahrenheit) 
without special measures, provided that condensing humidity conditions are not present.  

 

The scanner can be stored in temperatures between -20 and +70 degrees of Celsius (-4 to 158 Fahrenheit) in 
an airtight container to prevent the moisture forming inside the device. The container must be opened only 
after it has warmed up to normal room temperature (+15 to +25 degrees of Celsius or 59 to 77 Fahrenheit). 
An airtight carrying case is available for purchase at Grundium or your distributor. 

 

Use the scanner in temperatures between 15 and 40 degrees Celsius (59 to 104 Fahrenheit).  

 

Do not open the scanner or try to change the objective. Only persons authorized by Grundium may repair 
the product. Unauthorized modifications may damage the scanner.  

Note:

 Warranty is void 

if scanner’s seals are broken.

 

 

Do not drop, knock, or shake the scanner. Rough handling can break it or deteriorate its performance. 

 

Only use a soft, clean, dry, lint-free cloth to clean the surface of the scanner. Microfiber cloth works best. 

 

 

Use only a detergent that suits microscopes.  

 

Keep the scanner away from magnets or magnetic fields, as they may affect the scanner’s operation.

 Do not 

use this device in close proximity to sources of strong electromagnetic radiation (e.g. unshielded intentional 
RF sources), as these can interfere with proper operation. 

 

Keep the scanner away from strong light sources, as they may interfere with the scanner operation. 

 

Radio frequency bands and maximum transmitting power: Wi-Fi 2.4G 2412-2472 MHz (19.7 dBm), Wi-Fi 5G 
5180-5320 MHz (22.7 dBm). 

 

 

 

Summary of Contents for OCUS MGU-00001









































Reviews: