ķ
3
GB
Please note
Switching on and off
– with the ignition /starter switch
You can use the car's ignition/starter switch to
switch the radio on and off with the N multi-
function control (see page 13, supply voltages:
A 4 … + 12 V Stand-by voltage).
– car radio
You can use the
r
-multi-function control to
switch the car radio on and off when the car
radio ...
– is turned on with the ignition/starter switch,
or
– is not connected to the ignition/starter
switch.
Car radio fuse
Figure
+
at the beginning of the manual.
Flat fuse T 5 A /DIN 72 581 (plugged).
Coding
Your personal code number (code no.) is
found on your car radio's identity card.
When you have “activated” the coding of
your unit
As soon as you have removed the car radio or
separated it from your car battery supply
(permanent plus, terminal 30) it is then
electronically blocked.
Only you are able to unlock it again and put it
into operation by entering your personal code
number (code no.) (return to operation,
page 11).
Therefore:
activate the coding
(page 11).
SECURITY LED display
The LED display flashes under the display
if, …
– the coding is activated
(page 11),
– the LED display function is switched on
(page 13) and
– the car radio was switched off with the
ignition/starter switch in the vehicle
(page 3) or with the multi-function control.
Summary of Contents for WKC 1705 RDS
Page 18: ...0 1 2 3 4 5 6 7 8 9...
