- 15 -
4)
To change between Digital TV (DTV) and Analog TV (ATV), press the
SOURCE
Button on the remote
control to select the preferred mode.
5)
To change the channel in either mode, press the
CH+/CH-
Button or press the
OK
Button in TV mode to
display the Channel List. Then press the
UP/DOWN
Navigation Buttons to select the channel you want to
watch and press the
OK
Button to confirm the highlighted channel. You can also press
Numeric
Buttons
on remote to select the channel directly. To go back to the last channel you were watching you can press
the
RECALL
Button on the remote control.
6)
To change the source input to watch a connected accessory, press the
SOURCE
Button and then press
the
▲
or
▼
Navigation
Buttons to scroll through and select the available input source.
7)
To adjust the volume, press the
VOL+/-
Button to increase or decrease the sound level.
8)
Press the
MUTE
Button to turn off the sound only and press it again to turn on the sound again.
9)
Press the
INFO
Button to display the information of the channel playing. Press the Up or Down arrows to
scroll up through the information. Press the Right arrow to display the information of the next channel,
and press the Left arrow to return to the information of the current channel.
Teletext
Teletext is an information system broadcasted by certain channels which will provide detailed program
information. It also offers access to subtitles for viewers with hearing problems or who are not familiar with
the transmission language (cable networks, satellite channels, etc.) To view the TV Teletext Menu you must
be watching or in DTV mode. Below are the basic operation regarding to Teletext.
1.
Press the TEXT Button to enter the Teletext Menu. Press again to exit.
2.
Press the
CH+/-
or
Numeric
Buttons to select the page you wish to view.
Note:
When using the
Numeric
Buttons the first number should not be ‘0’ or ‘9’.
3.
Press the
INDEX
Button will open/return you to the contents page.
4.
Press the
HOLD
Button to freeze the page.
5.
Press the
Subpage
Button (certain pages contain sub-pages which are automatically displayed) to stop
or resume sub-page acquisition the indication appears top left.
