22
ENGLISH
OPERATION ______________________________
1
Pull out the the power cord to the required
length
J
.
Caution
█
A yellow mark on the power cord indicates the
recommended cord length. Never try to extend
the cord length beyond the red mark.
2
Insert the power cord
J
plug into the wall
socket.
3
Switch on the appliance by pressing the On/
Of button
O
.
4
Set the required suction power with the power
adjustment controller
N
.
Note
█
You can hold the vacuum cleaner by the car-
rying handle to move the appliance, but make
sure that the appliance is switched off before
carrying.
5
After use, press the On/Of button
O
to
switch of the appliance and remove the
power cord plug from the wall socket.
Caution
█
Always disconnect the mains plug from the
wall socket when the appliance is not in use.
6
Hold the power cord in one hand and press
and hold the button
K
.
7
Carefully guide the power cord back into the
appliance.
Caution
█
Always rewind the power cord with care as
pressing one side of the button
K
at a high re-
winding speed can cause unforeseeable cable
movements.
Suction control
The suction control
B
is located on the handle
and can be operated with your thumb. When
the control
B
is fully closed, the maximum suc-
tion power is reached.
However, in some cases it is advisable to have
less suction power, such as when cleaning mate-
rial, upholstery or shag pile carpets. Open the
control if and when required.
