Selio ECO
- 3 -
By default, your handset name and number are displayed on the idle screen. You can
change this display.
For this purpose, press and hold down the key
: The current time and date are
displayed on the screen.
To return to the previous display, press and hold down the key
.
Place the handset in the base station to charge for 15 hours prior to first use. if you don’t
properly charge the phone, batteries performance will be compromised.
9.
Plug one end of the telephone line cord into the modular wall phone jack and the other end
into the jack on the base.
10. After
charging,
press
key, you can hear dial tone.
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a safety measure,
you can use the power adaptors to cut off the 230V current in case of danger. They
must be located near to the device, and must be easily accessible.
2.3.
Handset keys
abc
def
jkl
ghi
mno
tuv
#
pqrs
wxyz
Internal call
Earpiece
Mute the microphone /
Correction / Cancel
Talk off /
Switch handset on/off
Access to phonebook /
Navigation key down
Navigation key up /
Access the caller list
Deactivate handset ringer
(Press and hold)
Microphone
Recall/Flash
Screen
Access to dialled number
Access to menu / Validate
Access to voice messaging
service (Press and hold) *
Talk on
Handsfree
Activate, deactivate keypad lock
(Press and hold)
* The voice mail number can be programmed. To change it, refer to « Assign a shortcut »
page 9.
