Grundig Selio ECO, User Manual

Page: 118 / 128

Selio ECO
- 13 -
8.2.
Date format / Hour format
8.2.1. Hour format
1. Press menu , select "
clock&alarm
" using the or key. Press menu .
2. Using the or key, select "
set format
". Press menu .
3. Using the or key, select "
time format
". Press menu .
4. Use or to select format.
5. Press menu key to confirm your selection. You will hear a confirmation tone.
8.2.2. Date format
This function allows you to define the date format (DD/MM ou MM/DD).
1. Press menu , select "
clock&alarm
" using the or key. Press menu .
2. Using the or key, select "
set format
". Press menu .
3. Using the or key, select " date format ". Press
menu
.
4. Use or to select format.
5. Press
menu
key to confirm your selection. You will hear a confirmation tone.
8.3.
Alarm clock
To set the date and time:
1. Press menu , select "
clock&alarm
" using the or key. Press menu .
2. Using the or key, select "
alarm
". Press menu .
3. To activate the alarm once, select "
on once
".
4. To repeat the alarm each day at the programmed time, select "
on daily
".
5. To deactivate the alarm, select " off ".
6. Select your choice then press menu :
Use the touch tone pad to enter the current alarm time. Enter minutes first (format
is HH:MM).
(If, after entering the time, the time format is
12H
, use the key to set
aM
and the key to
set
pM
).
7. Press
menu
key to confirm your selection. You will hear a confirmation tone.
8.4.
Modifying alarm tone
1. Press menu , select "
clock&alarm
" using the or key. Press menu .
2. Using the or key, select "
alarm tone
". Press
menu
.
3 melodies are available: "
melody 1
", "
melody 2
" and "
melody 3
".
3. Select the desired melody.
4. Press menu key to confirm your selection. You will hear a confirmation tone.
9. Advanced settings
9.1.
Base master PIN code
Your base station code (default setting 0000 ) is required to access certain security functions.
This code can include 8 digits.
1. Press menu . Select "
advanced set
" using the or key, press menu .
2. "
change pin
" appears on the screen. Press
menu
.
The base station code entry screen is displayed.