18
CONNECTION AND OPERATION
___________________________________________
Installing additional loudspeakers
For installation when expanding the system (for example from two to four
active loudspeakers), see the operating and installation instructions for WT2.
Resetting the loudspeakers to the original state
Note for dealers:
With this function you can delete all existing installation data and reset the
active loudspeakers to their original state.
1
When switched on, press »
RESET
« on the bottom of the device for longer
than 10 seconds, using an implement such as a thin pencil.
– The display flashes green and red.
Note:
After the installation data has been deleted, the loudspeakers must be instal-
led again.
Reset mode is not required during operation and installation, and is there-
fore only available for specialist dealers.
RESET
RESET
