Grundig RS-Set 2 User Manual Download Page 10

ENGLISH

19

INFORMATION

_____________________________________________________________

These loudspeakers are noise-suppressed according to the applicable EC directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC.

This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the interna-
tional safety regulation IEC 60065.

The type plate with information on the mains supply voltage and radio certification is located on the
back of the device.

The loudspeakers are intended for sale within the EU in the following countries: Belgium, Denmark,
Germany, UK, Finland, France, Ireland, Luxembourg, Netherlands, Norway, Austria, Portugal,
Sweden.

System

2-way bass reflex

Operating voltage: 230 V~ ± 10%

Mains frequency: 50/60 Hz 

Max. power consumption: 210 W

Power consumption in Stand-by: < 3 W

Dimensions: 
W x H x L 220 x 375 x 120 mm

Weight: 6,1 kg

Amplifier unit

Output: 75 W sine
120 W music

Receiver unit

Reception range – audio signal: 
863...865 MHz

Reception range – data signal: 
869.7…870 MHz

Transmission range: 50 ... 25,000 Hz

Technical data - RS-Set 2

DFM 869

Technical and optical modifications reserved.

Summary of Contents for RS-Set 2














Reviews: