ENGLISH
21
INFORMATION
__________________________________________________________________________
Rectifying minor problems
If the remedies below are not successful, please consult an authorised GRUNDIG dealer.
Fault
The active loudspeakers do
not work.
The LED in the power button
on the active loudspeaker
flashes orange.
The LED in the power button
on the active loudspeaker
flashes red.
There is noise interference
on the active loudspeakers.
Movements in the room
interfere with the playback
of the active loudspeakers.
Possible cause
The active loudspeakers are not switched
on.
The WT2 is not activated by the audio
source.
The active loudspeaker has not been
installed.
The active loudspeaker is overheated.
Possibly interference from another device.
The active loudspeakers have been
mounted / placed too low.
Remedy
Check the power cable and press
»
Z
« to switch on the active loud-
speaker.
Check the connection from the WT2
to the audio source.
Install the active loudspeaker.
Switch off the active loudspeaker
using the »
Z
« button and allow it
to cool down.
Select a different transmission
channel or change the position of
the active loudspeakers.
Remember the minimum height
approx. 0.8 m (ear height of a
seated listener).
