Grundig New York 40 CLX 8670 BP, User Instructions

Page: 93 / 122

93­ ENGLISH
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
Connecting­the­TV­to­a­“hidden”­
network
Even if the SSID (Service Set Identifier) of the
router is not visible, you can connect your TV to
this network.
1­ Open the menu with » MENU «.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confrim.
3­
Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4­ Select the line »Select Access Point« with
»
V
« or »
Λ
« and press » OK « to confirm.
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
5­
Press »

« (red).
– »Add Network« menu appears.
6­ Select the line »Access Point Name« with
»
V
« or »
Λ
« and press » OK « to confirm.
– A menu for entering the SSID will be
displayed.
Note:
7
For device to discover the wireless modem
on the network, the network name should
support ASCII characters.
7­
Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with »
OK
«.
– Using »
Shift
«
➡
»
OK
«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »
Del
« to delete the character
entered and press »
OK
« to confirm.
8­ Confirm the SSID by pressing »

« (green).
9­
Select the line »Security Type« with »
V
« or
»
Λ
« and select the required option (WPA2)
with »
<
« or »
>
«.
10­ Confirm the setting with »

« (red).
– The network is now in the »Select Access
Point« menu.
11­
Select the network with »
V
« or »
Λ
« and
press »
OK
« to confirm.
– Wireless connection password screen is
displayed.
12­ Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with » OK «.
– Using » Shift «
➡
» OK «, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select » Del « to delete the character
entered and press » OK « to confirm.
13­ Confirm the password by pressing »

«
(green).
– »Connecting ... Please wait« message will
be displayed.
14­
Press »

« (green) to make sure that the
network connection is established with the
current settings.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
15­ Press » EXIT « to end the setting.