Grundig New York 40 CLX 8670 BP, User Instructions

Page: 86 / 122

ENGLISH 86­
Wired­network­settings
There are two ways of making the wired net-
work settings.
A Automatic connection,
All data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic­connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
1­ Open the menu with » MENU «.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confirm.
3­
Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Change Area Connect Test Connection Select Zurück
BACK
Change Connection Type Wired
Network Configuration AUTO
Wake-on-LAN Off
Advanced
4­ Select the line »Change Connection Type«
»
V
« or »
Λ
« and press » OK « to confirm.
5­ Select the option »Wired« with »
V
« or »
Λ
«
and press » OK « to confirm.
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
6­
Select the line »Network Configuration«
with »
V
« or »
Λ
« and use »
<
« or »
>
« to
select »AUTO«.
7­ With »

« (red) select »Connect« to establish
modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8­ Press »

« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9­
Press »
EXIT
« to end the settings.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.