Grundig New York 40 CLX 8670 BP, User Instructions

Page: 107 / 122

107­ ENGLISH
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------
Creating­a­list­of­favourites­-­analog­
channels
You can select your favourite channels and save
them in up to four lists (FAV1 to FAV4).
1­ In the »Channel Editor« menu, select the
channel(s) you want to add in the favor-
ites list with »
V
«, »
Λ
«, »
<
« or »
>
«, and
highlight the television channel by pressing
» OK «.
–Channel is marked with »
✔
«.
2­
Activade the »Tools« menu with »

« (yel-
low).
3­ Select the line »Add To Fav.« with »
V
« or
»
Λ
« and press » OK « to confirm.
–»Add to Fav.« menu is displayed.
4­ Select the favorite list you want to add the
selected channels with »
V
« or »
Λ
« and
store with » OK «.
– The channels are marked in the Channel
Editor with »
❶
«, »
❷
«, »
❸
« or »
❹
«.
– You can add the same channel in more
than one favourites list.
– Each favourite list can contain maximum
255 channels.
Notes:
7
You can delete channels from the favou-
rites list. Press »

« (yellow), select the
favorites list the channel is in with »
V
« or
»
Λ
« and press » OK « to confirm. Select the
channel(s) you want to delete with »
V
«,
»
Λ
«, »
<
« or »
>
«, and highlight the channel
by pressing » OK «.
Press »

« (yellow) and select the line
»Remove from Fav.« with »
V
« or »
Λ
« and
confirm with » OK «. The channel you have
selected is now deleted from the favorites
list.
7
When a channel stored in the favourite
channel list is deleted channel order in the
favourite list is updated.
5­ Press » EXIT « to close the menu.
Displaying­signal­information
(only for digital television channels)
1­ Open the menu with » MENU «.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confirm.
3­
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4­ Select the line »Advanced« with »
V
« or
»
Λ
« and press » OK « to confirm.
5­
Select the line »Signal Information« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
– »Signal Information« menu is displayed.
Notes:
7
Signal information changes depending on
the current source.
7
Signal information is shown at the top of the
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6­ Press » EXIT « to close the menu.