ENGLISH
9
OPERATION
------------------------------------------------------------------------------------------------------------------
2
Switch the appliance on by
touching the sensor button
for
approx. 1 second.
– The display
lights up in
blue.
3
“Slide” over the sensor button
symbols to set the temperature.
To the right »
–
« to reduce the
temperature in 10 °C increments,
to the left »
+
« to increase the
temperature in 10 °C increments.
Notes
7
Select the lowest temperature
setting the first time you use it.
There are 10 temperature levels
available (140 °C = min.,
230 °C = max.).
E
D
7
The appliance reaches a tem-
perature of 200 °C in 60 sec-
onds – depending on the
temperature setting.
7
When set accordingly, the tem-
perature level reaches a maxi-
mum temperature of 230 °C
after approx. 60 seconds.
Hold the appliance in your
hand while it heats up.
4
Comb or brush out a strand of
your hair about 3 cm wide,
starting at the neck.
5
Place the strand of hair between
the ceramic plates
as close to
the hair line as you can, and
then close them.
Caution
7
Do not touch the ceramic plates
as they are very hot.
6
Hold the appliance in position
until the hair is heated.
– This takes a few seconds at
the most.
7
Guide the ceramic plates in a
careful, smooth movement away
from the head to the end of the
strand of hair.
Avoid making kinks in it.
Repeat the procedure strand by
strand.
A
Summary of Contents for HS 9930
Page 1: ...PROFESSIONAL HAIR STYLER HS 9930...
Page 2: ...2 A D E F H I J K G B C...
