background image

10

ENGLISH

OPERATION

------------------------------------------------------------------------------------------------------------------

Note 

7

If you have thick hair, you might
have to repeat this procedure
on the same strand several
times.

8

After use, switch the appliance
off by touching the sensor button

symbol for approx. 1 second

(the appliance must be
“unlocked”).
The display 

goes out.

Then unplug the power cord  .

Notes 

7

If the appliance is not used for a
while after it is heated up, it
switches off automatically after
60 minutes.

7

Never leave the appliance unat-
tended while it is plugged in.

7

Unplug the power cord after
use.
Allow the appliance to cool
down in a safe place and store
it in the heat-resistant cosmetic
bag.

H

D

E

Styling waves or curls 

Caution

7

The housing of the appliance be-
comes very hot near the heating
plates. Do not touch the housing
near the heating plates.

7

Place the appliance on the heat-
resistant styling mat. 

Note

7

Release the lock

if necessary.

1

Plug the power cord 

into the

wall socket.

2

Switch the appliance on by
touching the sensor button

for

approx. 1 second.
– The display 

lights up in

blue.

G

H

D

E

Summary of Contents for HS 9930














Reviews: