57 / 64 EN
Dryer / User Manual
Maintenance and cleaning
C
Clean metal surfaces of the sensors 4
times a year.
C
Do not use metal tools when cleaning
metal surfaces of the sensors.
A
cAUTIoN:
Never use solvents,
cleaning agents or similar substances
for cleaning due to the risk of fire and
explosion!
7.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water tank.
Drain the water tank after each drying cycle.
A
cAUTIoN:
Condensed water is not
drinkable!
A
cAUTIoN:
Never remove the water
tank when the program is running!
If you forget to drain the water tank, the
machine will stop during the subsequent drying
cycles when the water tank is full and the
Water Tank warning symbol will flash. If this is
the case, drain the water tank and press
Start
/ Pause
button to resume the drying cycle.
To drain the water tank:
1. Pull the drawer and remove the water
tank carefully.
2. Drain the water in the tank.
3. If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
4. Place the water tank into its seat.
7.4 cleaning the filter drawer
Lint and fiber that could not be captured by
the lint filter are blocked in the filter drawer
behind the kick plate. Filter Drawer Cleaning
warning light will light up maximum at every 5
drying cycles as a reminder.
There is a two-level filter in the filter drawer.
The first level is the filter drawer sponge and
the second level is the filter cloth.
