35 / 64 EN
Dryer / User Manual
1
Important instructions for safety and environment
This section contains safety instructions that
will help protect from risk of personal injury
or property damage. Failure to follow these
instructions shall void any warranty.
1.1 General safety
This product can be used by the children
at the age of 8 and over and the persons
with physical, sensory or mental disorders
or unlearned or inexperienced people as
long as they are attended by a person
who will be responsible for their safety or
who will instruct them accordingly about
use of the product. Children should not
tamper with the machine. Cleaning and
user maintenance works should not be
carried out by the children unless they are
attended by someone.
Never place the product on a carpet-
covered floor; otherwise, lack of airflow
beneath the machine will cause electrical
parts to overheat. This will cause
problems with your product.
Always have the installation and
repairing procedures carried out by
the
Authorized Service Agent
.
Manufacturer shall not be held liable for
damages that may arise from procedures
carried out by unauthorized persons.
1.1.1 electrical safety
If the product is faulty, it must not be
operated unless it is repaired by an
authorized service agent! There is the risk
of electric shock!
This product is designed to resume
operating in the event of a power
recovery following a power cut. If you
want to cancel an ongoing program,
look at the section titled “Canceling a
Program”.
Connect the product to an earthed outlet
protected by a 10 ampere fuse. Have the
grounding installation performed by a
qualified electrician. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
Unplug the product when it is not in use.
Never wash the product by spreading or
pouring water onto it! There is the risk of
electric shock!
Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
Unplug the machine from the mains
during installation, maintenance, cleaning
and repair works.
If the power cord of the machine is
damaged, in order to avoid the danger, it
should be replaced by the manufacturer,
an after sales service agent or an equally
qualified personnel (preferably an
electrician) or a person to be designated
by the importer.
Do not use extension cords, multi-plugs or
adaptors to connect the dryer to power
supply in order to decrease the risk of fire
and electric shock.
Power cable plug must be within easy
reach after installation.
1.1.2 Product safety
Do not connect the air exit of the product
to the chimney holes which are used
for the exhaust fumes of the devices
operating with gas or other types of fuel.
You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the back
fire effect.
Items cleaned or washed with gasoline/
diesel, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should not
