Grundig GSS SMCIP 402 C, Assembly Instruction Manual

Page: 31 / 42

- 31 - SMCIP 402 C/T
asi
inPut seleCtion
In this menu you select whether you would like to use the ASI input instead of
tuner D.
INPUT
off ASI INPUT
=> D ASI INPUT
=> OUTPUT ASI
• Press +/– to select …
… off means Tuner D ("ASI off ").
… => D means ASI input instead of tuner D (ASI => D ).
… => OUTPUT means "transparent mode" – only the transport stream from
the ASI input is unmodified transferred (no table modifications etc.) to the
modulator.
• Press the
MODE
button.
—> The "Input parameter" main menu – " INPUT " is activated.
i
nPut Par a meter
In this menu you select the tuner for which you would like to do the input set-
tings in the related submenus.
DVB-S
Tuner A INPUT
OK =>
—> In order to skip the input parameter settings, press button MODE . The
"Output data rate" menu is activated (page 36).
—> "OK" indicates a present input signal.
—> For ASI (instead of Tuner D) only the "Station selection" submenu is
available (page 34).
• Using the buttons +/– to select the desired input.
• Press the > button.
—> The "LNB oscillator frequency, control voltage" – " LNB " submenu is
activated.