- 24 -
SMCIP 402 C/T
o
utPut
Par a meter
,
level
– dvb-t
version
—> This menu is only displayed, if
RF+ASI
was selected before.
In this menu you adjust the output level of the modulator and you have access
to the submenus for the modulator configuration.
OUTPUT
=>
DVB-T
– 3 dB
• Using buttons
+/–
adjust the desired level (0dB … –31dB).
—> Therefore observe page 17.
—> In order to skip the "output parameter" settings press button MODE.
The "ASI input selection" menu – "ASI" is activated (page 31).
• Press the
>
button.
—> The "Channel/frequency" submenu – "
FREQ
" is activated.
C
hannel
/
frequenCy
In this menu you adjust the output channel/frequency of the modulator.
FREQ
850.00 MHz
DVB-T
C68
• Using buttons
</>
to select the cursor position for the channel or frequency
setting.
• Using buttons
+/–
to adjust the desired channel/frequency (C5…C12,
C21…C69/42 MHz … 868 MHz).
—> Therefore observe page 17.
• Press the
MODE
button.
—> The "Output signal" – "
MODE
" submenu is activated. Please take
note of the tables below before setting the COFDM parameters.
