- 16 -
HADA 5100 SPTS
udP
Port
The UDP port setting is required if the cassette shall be controlled via remote
access and the standard port 60000 can not be used.
Bx 4
60000
UDP-PORT
• Use the
buttons to place the cursor under the digit of the port number
displayed to be set and use
to set the port number wished ("
0
" …
"
65535
").
• Press the
button.
—> The "
INPUT
" main menu is activated.
i
nPut
In this menu you select the input, for which you would like to set the output
parameters in the submenus.
Bx 4
ASI-1
INPUT
OK =>
—> The indication "
OK
" serve for information:
OK - input signal is present at input 1.
• Use the
buttons to select the input ("
1
" … "
5
"), for which you would
like to set the output parameters.
—> To skip the settings of the input parameters press the
but-
ton. The "Stuffing the output data rate" – "
DATAMODE
" menu is
• Press the
button.
—> The "Output IP address" – "
IP-OUT
" submenu is activated.
