- 17 -
HADA 5100 SPTS
o
utPut
iP
addresse
In this menu you set the IP address for the ASI input signal selected.
ASI-1
227. 40. 50. 1
IP-OUT
—> Use an IP address of the multicast range (e.g. 227.40.50.x).
• Press the
buttons to position the cursor under the digit of the IP ad-
dress to be set.
• Using the
buttons set the IP address wished.
Allocating IP addresses to the outputs automatically
• Pressing the
button the following outputs are allocated with IP ad-
dresses in ascending order, starting from the IP address set.
—> The display shows "
auto
" for a short time.
• Press the button.
—> The "Switching the IP address off or on, Transmission protocol, Port
number" – "
MODE / PORT
" submenu is activated.
s
witChing
the
iP
address
off
or
on
t
r ansmission
ProtoCol
P
ort
number
In this menu you can switch off the IP address displayed, and define the trans-
mission protocol and the port number.
ASI-1
on UDP
MODE / PORT
1234
Switching the IP address off or on
• Press the
buttons to switch off ("
off
") or ("
on
") the IP address and the
service referred.
