Grundig GSBS11120X, User Instructions, Page: 35 / 763

33
DK
SV
NO
IT
FIN
HR
FL
FR
EL
NL
CZ
PL
RO
5.7 Taking ice / water
(Optional)
To take water ( ) / ice cube (
) / fragmented ice ( ), use the
display to select the respective
option. Take water/ice by pushing
the trigger on the water fountain
forward. When switching between
ice cube ( ) / fragmented ice ( )
options, the previous ice type may
be discharged a few more times.
•
You must wait approximately
12 hours before taking ice from
the ice / water fountain for the
first time. The fountain may
not discharge ice if there is
insufficient ice in the ice box.
•
The 30 pieces of ice cubes
(3-4 Litres) taken after first
operating should not be used.
•
In case of power blackout or
temporary malfunction, the ice
may partly melt and re-freeze.
This will cause the ice pieces to
merge with each other. In case
of extended power blackouts or
malfunction, the ice may melt
and leak out. If you experience
this problem, remove the ice in
the ice box and clean the box.
A
WARNING:
The
product’s water system
should be connected
to cold water line only.
Do not connect to hot
water line.
•
The product may not discharge
water during first operation.
This is caused by the air in the
system. The air in the system
must be discharged. To do
this, push the water fountain
trigger for 1-2 minutes until
the fountain discharges water.
The initial water flow may be
irregular. The water will flow
normally once the air in the
system is discharged.
•
The water may be cloudy during
first use of the filter; do not
consume the first 10 glasses of
water.
•
You must wait approximately
12 hours to get cold water after
first installation.
•
The product’s water system is
designed for clean water only.
Do not use any other beverages.
•
It is recommended to disconnect
the water supply if the product
will not be used for long periods
during vacation etc.