EN
GLISH
31
Setting the alarm
If the alarm is set, it will also function in standby mode. The
alarm emits an acoustic signal at the set time.
The correct settings for the date and time must be made before
the alarm can work.
1
Press »
SETUP
« to open the »Setup« menu.
2
Press »
S
« or »
A
« to select the »Alarm« menu item.
3
Press »
s
« to activate the hour setting.
4
Press »
A
« or »
S
« to select the hour and confirm using
»
s
«.
5
Press »
A
« or »
S
« to select the minutes and confirm using
»
s
«.
6
Press »
A
« or »
S
« to select »Once« or »Daily« setting
and confirm using »
OK
«.
– An acoustic signal will sound at the time set.
Note:
You can stop the alarm by pressing »
OK
«
or
deactivate the alarm by pressing »
A
« or »
S
« to select
the »Off« setting and confirm using »
OK
«.
Restoring the digital picture frame to the default
settings
1
Press »
SETUP
« to open the »Setup« menu.
2
Select the »Factory defaults« by pressing »
A
« or »
S
«
and confirm using »
OK
«.
– All custom settings will be deleted, including the date
and time.
Note:
The menu item »Default settings« is located on the second
menu page. To select that menu item, press »
S
« as often
as required.
PREFERENCES
------------------------------------------------------------------------------------
OSD language
English
Change picture
3s
Picture transition
Random
Picture format
Normal
Date/Time
2008 09 26 10:14
Alarm
00:00 Off
Switch-off time
00:00 Off
Brigthness
8
1
s
OSD language
English
Change picture
3s
Picture transition
Random
Picture format
Normal
Date/Time
2008 09 26 10:14
Alarm
07:00 Off
Switch-off time
00:00 Off
Brigthness
8
1
s
00
Contrast
8
Saturation
8
Factory defaults
1
s
